Product Description

L profile roll forming machine for production different size angle metal frame

 

Technical parameters

No.	ITEM		PARAMETER	REMARK
1	MATERIAL	Type	Cold-rolled strip steel, galvanized sheet
		T.(mm)	0.4-0.7mm
		Yield Strength	G245MPa
2	Forming product   Width		Depend on design
3	Forming speed   (m/min)		10-15m
4	Forming main power   (KW)		4 KW	FYR
5	Hydraulic power   (KW)		4 KW	FYR
7	Voltage		AC380V，50Hz，3P	Custimized

 

 

Angle steel forming machines  (for panel width 65mm with reinforcemnt design )

 

5.1  Forming Roller：14 stations，and add Rub-roll, To make sure the surface profile no scratches.

5.2  Side Panel：T.18mm ,A3 steel   Heavy duty 。

5.3  Rolling speeding: 2-8 m/min。

5.4  Roller material：#45，overall quenching, hardness HRC56-62 ℃. 
5.5  Motor power：4KW。    
5.6  Main Roller ：dia.65mm，45 #。
5.7  Equipment base: 400# H type using welded steel plate.
5.8  Transmission: chain drive.
5.9 Security: across the board with emergency stop buttons, easy to handle emergencies, to ensure that equipment and operator safety. And other gear in the chain and the staff could easily lead to injury transmission section covered with protective cover, to ensure the safety of workers.

 

https://www.superdamc.com

Payment Terms︰ By TT