Electrical Cabinet enclosure roll forming machine production line
Roll forming machine for production electrionic cabinet enclosure, including cabinet panel forming machine, panel box bending.
Metal Forming machine for electrical cabinet box panel
1,Technical parameters (Item:YX20-150/200/250/300/350)
| No. |
ITEM |
PARAMETER |
REMARK |
| 1 |
MATERIAL |
Type |
Cold-rolled strip steel, galvanized sheet |
|
| T.(mm) |
0.8-1.2mm |
|
| Yield Strength (Mpa) |
Q235 |
|
| 2 |
Forming product Width |
150,200,250,300,350mm |
|
| 3 |
Forming speed (m/min) |
2-8m |
Including hole |
| 4 |
Forming main power (KW) |
7.5 KW |
FYR |
| 5 |
Hydraulic power (KW) |
18.5 KW |
FYR |
| 6 |
Bending power (KW) |
3 KW |
FYR |
| 7 |
Voltage |
AC380V，50Hz，3P |
|
Distribution box production line process
(A) 2 in 1 Uncoiler Straightening→servo feeder→Hydraulic press breach device → Guide device → roll forming machine → hydraulic punch →shear device (including knife)→ finished product rack
Item YX20-150/200/250/300/350
Distribution box roll forming machine for producing outdoor indoor electrical distribution panel forming and folding which using electrical industry.
Distribution box application
Power distribution box is widely used in architectural lighting and small power control circuits of hotels, apartments, buildings, ports, stations, airports, warehouses, hospitals, factories and mines, etc. It is suitable for AC 50Hz, AC single-phase 240V, three-phase 450V and In the following, indoor lighting and power distribution lines with currents of 250A or less are used for line overload protection, short circuit protection, and line switching. Power distribution box is suitable for civilian and not need professional technology, it is very easy using and safety.
https://www.superdamc.com
