Solar Mounting bracket roll forming machine production line
Roll forming machine for production solar bracket named as solar pv bracket, solar photovoltaic bracket.
Roll forming machine for solar mounting bracket
1,Technical parameters
| No. |
ITEM |
PARAMETER |
REMARK |
| 1 |
MATERIAL |
Type |
Cold-rolled strip steel, galvanized sheet |
|
| T.(mm) |
5.0mm |
|
| Yield Strength (Mpa) |
Q235-300 |
|
| 2 |
Forming product Width |
50mm |
|
| 3 |
Forming speed (m/min) |
10-18m |
|
| 4 |
Forming main power (KW) |
45 KW |
FYR |
| 5 |
Hydraulic power (KW) |
18.5 KW |
FYR |
| 6 |
Voltage |
AC380V，50Hz，3P |
|
Solar bracket production line process
(A) 2 in 1 Uncoiler Straightening→servo feeder→Hydraulic press breach device → Guide device → roll forming machine → hydraulic punch →shear device (including knife)→ finished product rack
Solar mounting bracket C channel roll forming machine for production different size solar pv support
Main technical parameter:
quickly change the type of roll forming machine
Raw material thickness:5.0mm
Forming steps: 16 steps
Roller material: bearing steel after hardening
Roller bearing diameter : Φ140mm
Bearing material: 45# steel (hardening and tempering)
Bottom sheet: 36# H-section steel
Main machine power: 45 KW
Hydraulic pressure: 20 MPa
Electronic control system: PLC computer control
Hydraulic cutter material: Cr12
Length error: ± 2mm
https://www.superdamc.com
