L profile roll forming machine for production different size angle metal frame
Technical parameters
No. |
ITEM |
PARAMETER |
REMARK |
1 |
MATERIAL |
Type |
Cold-rolled strip steel, galvanized sheet |
|
T.(mm) |
0.4-0.7mm |
|
Yield Strength |
G245MPa |
|
2 |
Forming product Width |
Depend on design |
|
3 |
Forming speed (m/min) |
10-15m |
|
4 |
Forming main power (KW) |
4 KW |
FYR |
5 |
Hydraulic power (KW) |
4 KW |
FYR |
7 |
Voltage |
AC380V,50Hz,3P |
Custimized |
Angle steel forming machines (for panel width 65mm with reinforcemnt design )
5.1 Forming Roller:14 stations,and add Rub-roll, To make sure the surface profile no scratches.
5.2 Side Panel:T.18mm ,A3 steel Heavy duty 。
5.3 Rolling speeding: 2-8 m/min。
5.4 Roller material:#45,overall quenching, hardness HRC56-62 ℃.
5.5 Motor power:4KW。
5.6 Main Roller :dia.65mm,45 #。
5.7 Equipment base: 400# H type using welded steel plate.
5.8 Transmission: chain drive.
5.9 Security: across the board with emergency stop buttons, easy to handle emergencies, to ensure that equipment and operator safety. And other gear in the chain and the staff could easily lead to injury transmission section covered with protective cover, to ensure the safety of workers.
https://www.superdamc.com